-->
What are the types of resistance welding and their types?

What are the types of resistance welding and their types?

Resistance Welding:- It is a welding process, in which the workpiece is welded due to a combination of a pressure applied to them and a localized heat generated by a high electric current flowing through the contact area of the weld. The heat produced by the current is sufficient for the local melting of the workpiece at the contact point and formation of a small weld pool which is also called nugget. The molten metal then solidifies under a pressure and joins the pieces. The time of the process and values of the pressure and flowing current, required for the formation of the reliable joint, are determined by dimensions of the electrodes and the workpiece metal type.



               AC electric current (up to 100000 A) is supplied through copper electrodes connected to the secondary coil of the welding transformer.

The following metals may be welded by resistance welding:-


  • Low carbon steels are widely used in resistance welding.
  • Aluminum alloys.
  • Medium carbon steels, High carbon steels and alloy steels (may be welded, but the weld is brittle).
Advantage:-
  • High welding rates.
  • Low fumes.
  • Cost-effectiveness.
  • Easy automation.
  • No filler material is required.
  • Lo0w distortions.
Disadvantages:-
  • High equipment cost.
  • Low strength of discontinuous welds.
  • The thickness of welded sheets is limited up to 1/4" (6 mm).
              Resistance Welding is used for joining vehicle body parts, fuel tanks, Domestic radiators, pipes of gas oil and water pipelines, wire ends, turbine blades, railways tracks.

The most popular methods of resistance welding are:-
  • Spot welding (RSW)
  • Flash welding (FW)
  • Resistance butt welding (UW)
  • Seam welding (RSEW)
1. Spot Welding:- It is a resistance welding process, in which two or more overlapped metal sheets are joined by spot welds. The method uses pointed copper electrodes providing passage of electric current.


The electrodes also transmit pressure required for the formation of strong weld. The diameter of the weld spot is in the range 1/8"-1/2" (3-12 mm). Spot welding is widely used in the automotive industry for joining vehicle body parts.

2. Flash welding:- It is a resistance welding process, in which ends of rods (tubes, sheets) are heated and fused by an arc struck between them and then forged (Brought into contact under a pressure) producing weld. The welded parts are held in electrode clamps, one of which is stationary and the second is movable. Flash welding method permits fast (about 1 min.) joining of large and complex parts. Welded parts are often annealed for improvement of the toughness of the weld. Steels, Aluminium alloys, copper alloys, Magnesium alloys, copper alloys, and nickel alloys may be welded by flash welding. Thick pipes, ends of band saws, frames, aircraft landing gears are produced by flash welding.

3. Resistance butt welding:- It is a resistance welding process, in which ends of wires or rods are held under a pressure and heated by an electric current passing through the contact area and producing a weld. The process is similar to flash welding, however in butt welding pressure and electric current are applied simultaneously in contrast to flash welding where the electric current is followed by forging pressure application. But welding is used for welding small parts. The process is highly productive and clean. In contrast to flash welding, butt welding provides joining with no loss of the welded materials.

4. Seam welding:- It is a resistance welding process of continuous joining of overlapping sheets by passing them between two rotating electrode wheels. The heat generated by the electric current flowing through the contact area and pressure provided by the wheels are sufficient to produce a leak-tight weld. Seam welding is a high speed and clean process, Which is used when the continuous tight weld is required (fuel tanks, drums, domestic radiators). 




6 Responses to "What are the types of resistance welding and their types?"

  1. Useful information and wonderful design. Thanks for this nice information and appreciate this. laserskæring

    ReplyDelete
  2. . However, unlike the consumable electrode welders, the electrode of the TIG welder does not melt or disappear. Because of this, the electrode in TIG welders does not need to be replaced, TIG Welder guides

    ReplyDelete
  3. Oh wow 10 Best Tig Welder 2020 for the Money worked.. thnx! I thought it was a scam and it would not work but it did so thank you!

    ReplyDelete
  4. The plasma generator or weapon head comprises of a tungsten cathode, an air-cooled pilot spout made of copper, a power conductive consumable wire which is the know as the anode. by targetwild

    ReplyDelete
  5. There has been an ongoing impact of funnel that is made of plastic or polymer materials as opposed to metal. In spite of the fact that this is actuality, another reality that won't change is that plastic funneling can not the slightest bit supplant irons or pure materials where basic weights or corrosives are utilized inside the channeling procedure. Substance plants or treatment facilities will consistently utilize metal more than anything. Welderit

    ReplyDelete
  6. The normal individual's impression of how metal is welded is that you basically fire-up a blow light and run it along the edge of a metal crease to weld it together. Sean Coby

    ReplyDelete